Peterson BBS-1 BodyBeat Sync - Manual (Page 5)

-5-
Thank you for your purchase of the Peterson BodyBeat Sync BBS-1. Please take the time to read this
instruction manual so that you may get the most out of it. This metronome represents the ultimate in
musical tempo monitoring devices. As a fully featured metronome, it is capable of transmitting the beat by
visual, aural and tactile means. Wireless functionality allows two or more BodyBeat Syncs to work in syn-
chronicity with one another, allowing the networking of multiple units on stage, in the recording studio,
band room or anywhere the precise synchronization of a performance and its performers is required.
Included Items
1 BodyBeat Sync Metronome
1 Vibe Clip
1 Owner’s Manual
1 3.7V Lithium Ion Battery
1 Mini USB Cable
Power
The BodyBeat Sync contains a powerful internal rechargeable Lithium Ion battery. Before initial use, this
battery will need to be installed and charged fully, using either a USB power adapter, or by connecting
the BodyBeat Sync to a computer USB port via the USB cable. The BodyBeat Sync will not run off of USB
power alone. Charging time is approximately 1.5 hours.
Battery Conservation
The BodyBeat Sync will power off after 10 minutes of inactivity if the metronome is not running. In
addition, the LCD backlight will turn off after 10 seconds of inactivity. If the battery voltage becomes too
low, the BodyBeat Sync will power off to protect its Lithium Ion battery.
USB/Power Socket