Peterson BBS-1 BodyBeat Sync - Manual (Page 17)

-17-
Creating and Storing Presets -If the Preset / Voice / Bar / Note Display is not currently displaying the Preset
label, press the Preset button until it does so. To create a preset, you may simply edit the current set-
tings or use the Next and Previous buttons to navigate to a new preset location. Access the various settings
within a preset by pressing the corresponding button ( Tempo, Meter, Subdivision, Accent ).
Then, adjust the value of that setting by rotating the Value Wheel.
Tempo - Press the Tempo Button one or more times to toggle between adjusting in whole number
increments and 1/10th increments. Tempo range is from 10 - 280 quarter notes per minute.
Rotate the value wheel to change.
Meter - Press the Meter Button one or more times to toggle between adjusting the Beats Per
Measure parameter ( 1 - 12 ) and the Beat Value parameter (2,4,8,16). Rotate the value wheel to
change.
Subdivision - When the Beat Value parameter of the Meter is adjusted, the Subdivision will reset
to the first subdivision in the list of available subdivisions for that meter, which is always
one whole, unsubdivided beat for that meter. Rotate the value wheel to change. Selectable values
are always represented on the display as a correctly notated full beat of the selected meter.
See Appendix A - Subdivisions
Accent Pattern - When the Beats Per Measure parameter of the Meter is adjusted, the Accent
Pattern will reset to NO Accent Pattern, as the list of available Accent Patterns has changed.
Rotate the value wheel to change.
You will notice the icon will appear in the Icon / Status Display when you have changed a setting within
a preset. This signifies that the preset has been edited, but not yet stored. Navigating away from this preset
will discard the changes you may have made and revert to the unedited preset. The will disappear as
the preset is no longer edited and all changes have been lost.