Peterson BBS-1 BodyBeat Sync - Manual (Page 26)

-26-
Updating The Firmware - Turn off your BodyBeat Sync and connect it to a computer using the provided
mini USB cable. Press and hold the Tempo Select Button, then press and hold the Start / Stop - On
/ Off Button to power the unit on. The BodyBeat Sync will load into Update Mode, and the Updating Icon
will appear in the lower right corner of the LCD display.
Plugging the BBS-1 into the USB port may automatically turn the unit on in some cases.
Holding down the Tempo Select Button when this happens will result in the BBS-1 loading into
Update Mode as well.
Note: You will need to have downloaded and installed the BodyBeat Sync USB software for your
particular Operating System as well as downloaded the latest firmaware *.bin file. The latest ver
sions of both will always be available at the following locations.
USB software: http://www.bodybeat.net/syncUSBpc or http://www.bodybeat.net/syncUSBmac
Latest Firmware: http://www.bodybeat.net/syncfirmware
Tempo Select