Basic metronome functions – Peterson BBS-1 BodyBeat Sync User Manual
Page 14

-14-
Preset / Voice / Bar / Note Display - In normal metronome operation, these three digits will display
either the bar counter or the current active preset. In tuning mode, the right-most digit will display
the note letter along with the sharp and flat symbol while the left-most digit will display the octave
number. In voice select mode, the center digit will display voice numbers 1-4. Practice Patterns be-
yond preset 100 will display as 3 digit alphanumeric abbreviations. In the event that a problem occurs
with your BodyBeat Sync‘s software, this area may also be used to display an error code. A list of error
codes can be found at www.BodyBeat.net.
Tempo / Concert A Display - In normal metronome operation, these four digits will display the beats
per minute of the active preset or tempo map in 1/10th BPM resolution from 10-280. Note the deci-
mal point. In Tuning mode, the Concert A reference will be displayed in 1/10th Hz resolution from
390Hz to 490Hz.
Sync Mode Display - Displays the current sync mode. The will appear in Sync mode when the unit
has successfully joined a group.
Meter Display - The meter or time signature of the active preset or tempo map is displayed here. The
Beats Per Measure (numerator) range is 1-12, while the Beat Value (denominator) can be either 2,4,8
or 16.
Basic Metronome Functions
LCD Display Areas