Peterson BBS-1 BodyBeat Sync - Manual (Page 13)

-13-
Panel Lock
Sliding this switch to the right will disable all of the controls on the BodyBeat Sync to prevent the
accidental alteration of any settings during use. A “locked” icon will be revealed on the switch as well as on
the LCD display. Sliding the switch back to the left will reveal an “unlocked” icon and will re-enable the
controls for use. When locked, the “locked” icon will flash when any button is pressed to remind the user
that the panel has been locked.
The Panel Lock switch does not disable the ability to power the unit on or off or to adjust the
volume. Powering the unit off does, however, require the use of the Shift Key to avoid accidentally
turning the unit off during normal operation. See Start/Stop On/Off.
Start / Stop - On / Off
Starts and Stops the Metronome both in normal Metronome Preset mode and in MIDI Tempo Map
Playback mode. When the unit is off, pressing and holding this button for 2 seconds will power the unit
on.
SHIFT FUNCTION: - When the unit is on, pressing and holding this button for 2 seconds while
holding the Shift button will power the unit off.
Note: The BodyBeat Sync can start in different modes of operation by holding other buttons
while powering on. See sections entitled “POWER ON FUNCTION” in Sync Mode Select and
Tempo Select.