Peterson BBS-1 BodyBeat Sync - Manual (Page 11)

-11-
Note: The list of available Accent Patterns is dependent on the Beats Per Measure Value chosen
within the Meter setting. Since the list of available Accent Patterns consists of every
possible combination of 2 and 3 that will add up to the current Beats Per Measure, there are no
Accent Patterns available for Meters with a Beats Per Measure setting of 1-3. For a complete list of
available Accent Patterns relative to the Meter setting, see Appendix B. - Accent Patterns.
SHIFT FUNCTION - Pressing this button while holding the Shift button will toggle between
“Normal” and “Accents Only” modes. In “Accents Only” mode, the dashes between the numbers
will disappear, signifying that the unaccented beats will not be heard. When there is no accent
pattern selected, toggling to “Accent Only” mode will result in only the downbeat of each bar being
heard.
Value Wheel / Tap Tempo Control.
Turning the wheel will alter the value of whatever parameter has been selected using the right row of
buttons - . Rotating the wheel clockwise increments the value while counter-clockwise decrements
the value. If a parameter has not recently been selected or changed ( within 8 seconds ), the Value Wheel
will affect the tempo setting as default. Pressing in or down on the wheel repeatedly will set the tempo via
Tap Tempo Mode. For more information on Tap Tempo see Tempo Select.
Note: When editing preset parameters, the “E” icon will appear at the top of the LCD to signify
that a preset has been edited but not stored. Your changes will be lost if the preset is not stored.
Previous Preset / Previous Bar / Seek
Steps backwards through the list of 100 available user presets when the Preset is displayed on the LCD.
Steps backwards through the bars or measures of a preset or MIDI tempo map when Bar is displayed on
the LCD. This button is also used to step backwards through voices when in Voice Selection Mode .