Peterson BBS-1 BodyBeat Sync User Manual
Page 10

-10-
Meter Select
Activates the Meter Mode. Subsequent presses of the Meter Button will toggle between the
Beats Per Measure setting (numerator) and the Beat Value setting (denominator). The active component
will flash with the Meter icon. Once selected, the Value Wheel will increment or decrement the active
component.
The Beats Per Measure parameter can be adjust from 1 to 12. Adjusting the Beats Per Measure
parameter will clear any active Accent Pattern as the list of available Accent Patterns is dependent
on Beats Per Measure.
The Beat Value parameter has a list of possible values consisting of 2,4,8,16. Adjusting the
Beat Value parameter will reset any Subdivision setting as the list of available Subdivisions is
dependent on the Beat Value.
Subdivision Select
Activates the Subdivision Mode. Once selected, the Value Wheel will increment or decrement through
the list of available subdivisions.
Note: The list of available subdivisions is dependent on the Beat Value chosen within the Meter
setting. For a complete list of available subdivisions relative to the Meter setting, see
Appendix A. - Subdivisions
Accent Pattern Select
Activates the Accent Pattern Mode. Once selected, the Value Wheel will increment or decrement
through the list of available Accent Patterns. Accent Patterns help in counting complex Meters by dividing
the total Beats Per Measure into different combinations of 2 and 3 counts.