B&B Electronics RT3G-300_310_320_330_340-W - Configuration Manual User Manual
Page 79
B&B Electronics, Inc.
SPECTRE Configuration Manual
79
SPECTRE_Configuration_Manual_2912m
www.bb-elec.com
www.bb-europe.com
2.
Attention! The SPECTRE 3G router cannot operate unless there is a SIM card
installed or the carrier has been provisioned. The account must be provisioned for data
communication.
Monitoring of status, configuration and administration of the router can be performed
by means of the Telnet interface. The default IP address of the modem is 192.168.1.1.
Configuration may be performed only by the user "root" with initial password "root".
The following commands may be used to configure the router over Telnet:
Command
Description
cat
display file
cp
copy a file
date
show/change system time
df
Display information about file system
dmesg
kernel diagnostic messages
echo
string write
Email send
free
Display information about available memory
gsmat
Send an AT commend
gsminfo
Display information about signal quality
gsmsms
SMS send
hwclock
display/change of time in RTC
ifconfig
display/change of interface configuration
io
reading/writing input/output pins
ip
display/change of route table
iptables
display/modification of NetFilter rules
kill
Kill process kill
killall
Kill all processes
ln
link create
ls
dump directory contents
mkdir
create file
mv
Move file
ntpdate
synchronize system time with NTP server
passwd
password change
ping
ICMP ping
ps
display process information
pwd
display directory contents
reboot
Reboot
rm
file delete
rmdir
directory delete
route
display/change route table
service
start/stop a service
sleep
pause number of seconds
slog
display system log
tail
display file end
tcpdump
monitoring of network
touch
file create/change time stamp
vi
text editor
Table 61: Telnet commands