B&B Electronics RT3G-300_310_320_330_340-W - Configuration Manual - Manual (Page 47)

B&B Electronics, Inc. SPECTRE Configuration Manual
47
SPECTRE_Configuration_Manual_2912m
www.bb-elec.com
www.bb-europe.com
1.17. L2TP tunnel configuration
Select the L2TP item in the menu to configure an L2TP tunnel. L2TP is a protocol
which is used to create a secure connection between two LANs. Only one L2TP tunnel may
be created.
Item Description
Mode L2TP tunnel mode on the router side
L2TP server - For a server, you must define the start and end
IP address range offered by the server
L2TP client – For a client, you must enter the IP address
of the server
Server IP Address IP address of server
Client Start IP
Address Start IP address in range, which is offered by server to clients
Client End IP
Address End IP address in range, which is offered by server to clients
Local IP Address IP address of the local side of the tunnel
Remote IP
Address IP address of the remote side of the tunnel
Remote Subnet Address of the network behind the remote side of the tunnel
Remote Subnet
Mask The mask of the network behind the remote side of the tunnel
Username Username for login to L2TP tunnel
Password Password for login to L2TP tunnel
Table 35: L2TP tunnel configuration
Press the Apply button to apply changes.
Fig. 38: L2TP tunnel configuration