B&B Electronics RT3G-300_310_320_330_340-W - Configuration Manual - Manual (Page 15)

B&B Electronics, Inc. SPECTRE Configuration Manual
15
SPECTRE_Configuration_Manual_2912m
www.bb-elec.com
www.bb-europe.com
1.5. IPsec status
Selecting the IPsec option in the status menu of the web page will bring up the
information for any IPsec Tunnels that have been established. Up to 4 IPsec tunnels can be
created. If no IPsec tunnels are configured, the
status will show that “IPsec is disabled”.
If an IPsec tunnel is established, the router will show “IPsec SA established”
(highlighted in red) in the IPsec status information.
Fig. 5: IPsec status
1.6. DynDNS status
The router supports DynamicDNS using a DNS server on www.dyndns.org . If
Dynamic DNS is configured, the status can be displayed by selecting menu option DynDNS.
Refer to
www.dyndns.org for more information on how to configure a Dynamic DNS client.
Fig. 6: DynDNS status
DynDNS client is disabled.
Invalid username or password.
Specified hostname doesn‟t exist.
Invalid hostname format.
Hostname exists, but not under specified username.
No update performed yet.
DynDNS record is already up to date.
DynDNS record successfully updated.
DNS error encountered.
DynDNS server failure.
Table 8: DynDNS report
For Dynamic DNS to function properly, the router‟s SIM card must have a public IP address
assigned.