B&B Electronics RT3G-300_310_320_330_340-W - Configuration Manual User Manual
Page 57
B&B Electronics, Inc.
SPECTRE Configuration Manual
57
SPECTRE_Configuration_Manual_2912m
www.bb-elec.com
www.bb-europe.com
1.23. SMS configuration
Note: The SPECTRE RT industrial router does not support SMS messaging configuration.
The SPECTRE 3G router can automatically send SMS messages to a cell phone or
SMS message server when certain events occur. The SMS Configuration page allows the
user to select which events will generate an SMS message.
Item
Description
Send SMS on power up Send an SMS message when the router powers up
Send SMS on PPP
connect
Send an SMS message when the PPP connection is active.
Send SMS on PPP
disconnect
Send an SMS message on PPP disconnection.
Send SMS when
datalimit exceeded
Send an SMS message when the data limit is exceeded.
Send SMS when binary
input on I/O port (BIN0)
is active
Send an SMS message when the binary input on the I/O port
(BIN0) goes active. The text of the message is set using
parameter BIN0.
Send SMS when binary
input on expansion port
(BIN1-BIN4) is active
Send an SMS message when a binary input on the I/O expansion
port (BIN1-BIN4) is active. The text of the message is set using
parameters BIN1 - BIN4.
Add timestamp to SMS
Adds a time stamp to the sent SMS messages. The timestamp
has the format YYYY-MM-DD hh:mm:ss.
Phone Number 1
The telephone numbers that the SMS messages will be sent to.
Phone Number 2
Phone Number 3
Unit ID
The name of the router that is included in the SMS messages.
BIN0 - SMS
User-defined Text field 0 for the SMS messages.
BIN1 - SMS
User-defined Text field 1 for the SMS messages.
BIN2 - SMS
User-defined Text field 2 for the SMS messages.
BIN3 - SMS
User-defined Text field 3 for the SMS messages.
BIN4 - SMS
User-defined Text field 4 for the SMS messages.
Table 45: Send SMS configuration
You can also control the function of the router by sending SMS messages to the
device. The router can be commanded to go online or offline via an SMS message or to
switch to the alternate SIM card or provider. The binary outputs can also be set or reset
using SMS. The Enable remote control via SMS option must be selected to enable this
feature. Up to three numbers can be configured for incoming SMS messages. If the Enable
remote control via SMS option is set, all incoming SMS messages are processed by the
router and deleted.
Item
Description
Phone Number 1
Allowed phone numbers for incoming SMS messages.
Phone Number 2
Phone Number 3
Table 46: Control via SMS configuration