B&B Electronics RT3G-300_310_320_330_340-W - Configuration Manual - Manual (Page 37)

B&B Electronics, Inc. SPECTRE Configuration Manual
37
SPECTRE_Configuration_Manual_2912m
www.bb-elec.com
www.bb-europe.com
1.14. OpenVPN tunnel configuration
Select the OpenVPN item in the menu to configure an OpenVPN tunnel. OpenVPN is
a protocol which is used to create a secure connection between two LANs. Up to 2
OpenVPN tunnels may be created.
Item Description
Create Enables the individual tunnels.
Description Displays the name of the tunnel specified in the configuration of the tunnel.
Edit Select to configure an OpenVPN tunnel.
Table 26: Overview of OpenVPN tunnels
Fig. 29: OpenVPN tunnel configuration
Item Description
Description Description of tunnel.
Protocol
Protocol by which the tunnel will communicate.
UDP – OpenVPN will communicate using UDP.
TCP server
– OpenVPN will communicate using TCP in server
mode.
TCP client – OpenVPN will communicate using TCP in client
mode.
UDP/TCP port Port by which the tunnel will communicate.
Remote IP
Address IP address of the opposite side of the tunnel. Can be used domain
name.
Remote Subnet Network IP address of the opposite side of the tunnel.
Remote Subnet
Mask
Subnet mask of the opposite side of the tunnel.
Redirect Gateway It is possible to redirect all traffic on Ethernet.
Local Interface IP
Address
IP address of the local side of tunnel.
Remote Interface
IP Address
IP address of interface local side of tunnel.
Ping Interval
Parameter (in seconds) defines how often the router will send a
message to the remote end to verify that the tunnel is still connected.
Ping Timeout
Parameter which defines how long the router will wait for a response to
the ping (in seconds). Ping Timeout must be larger than Ping