Rainbow Electronics MG260 - Manual (Page 26)

MG260 Product Specification
This document is the sole and exclusive property of FLYFOT. Not to be distributed or divulged without prior written
agreement.
Common
Interface
GSM Interface
GPS
Interface
2 System connector interface
2.1 System connector description
The system connector is an 80-pin connector, with 0.5 mm pitch, which is available to
interface the MG260 with the customer application.
This connector is made by Panasonic with the following reference: AXK680347YG
The matting connector for customer application has the following reference: AXK580147YG
For further details, refer to paragraph 6.3, System Connector data sheet.
2.2 Functional interfaces
Main Power Supply(*)
Module Activation(*)
Download mode control
Reset(*)
Activity Status Indication
Real Time Clock Power Supply
GSM Serial link(*)
GSM Burst Emission Indication
GSM External Interrupt
GSM GPIO
GSM GPO
GSM GPI
SIM Interface(*)
Keyboard
Audio interfaces
Buzzer
Analogue to Digital Converter
3V power supply for peripherals
GPS activation(*)
GPS Serial Link(*)
GPS External Interrupt
GPS Active antenna management
GPS SPI Bus for Dead Reckoning
1.8V power supply for peripherals
GROUND Connection(*)through solder joint of shielding legs
(see mechanical drawing for details)
Legend: (*) = minimum interfaces required for the customer application.
Figure 6: System connector functional description