Rainbow Electronics GE863-GPS low power - Manual (Page 68)

GE863-GPS Software User Guide
1vv0300724 Rev. 3 - 05/07/07
Reproduction forbidden w ithout Telit Communications S.p.A. w ritten authorization - All Rights Reserved page 68 of 122
Hence, the message format is the binary number 00010001 corresponding to the integer 17.
- Validity period 24 hours corresponding to an integer value 167.
12 hours + ((167 -143) x 30 min) = 24 hours
- Protocol ID implicit (SMS sent to a mobile terminal) corresponding to a value 0.
- DCS default value 0.
command:
AT+CSMP= 17,167,0,0
response:
OK
2- Let's assume you want to set the SMS parameters to the values:
- Message Format:
- SMS submit
- don't reject duplicates
- VP Format semi octet (absolute)
- status report requested
- No Header on PDU
- Reply path not set
Hence, the message format is the binary number 00111001 corresponding to the integer 57.
- Validity period format is absolute, hence it represents the expiration date of the message and the
desired expiration date is for example 29/06/02 at 02:20 in the time zone of Italy (+1).
"29/06/02,02:20:00+1"
- Protocol ID implicit (SMS sent to a mobile terminal) corresponding to a value 0.
- Data Coding Scheme:
- Default Alphabet
- Class 0 (e.g. immediate display SMS)
Corresponding to the binary number 11110000 corresponding to the integer 240.
command:
AT+CSMP= 57,29/06/02,02:20:00+1,0,240
response:
OK
3.5.1.6 Select SMS Memory and check for memory space
There are various types of storage where the SMS can be stored, the Telit GE863-GPS provides two
different storage:
"ME" - mobile equipment memory
"SM" - SIM Card memory
The SMS are usually stored (this is true for both the originated and the received SMS) in the SM
storage, the "ME" storage is a read only one where the Class 0 messages received are stored
(regardless of the selected active storage which may be "SM").
For this reason the "ME" storage can be selected to read the Class 0 messages.