1 selecting pb storage active, At+cpbs= Page 34
Page 34
GE863-GPS Software User Guide
1vv0300724 Rev. 3 - 05/07/07
Reproduction forbidden w ithout Telit Communications S.p.A. w ritten authorization - All Rights Reserved
page 34 of 122
3.1.1.1 Selecting PB storage active
•
Send command
AT+CPBS=
where:
SM – SIM phonebook
FD – fixed dialing phonebook
LD – last dialed calls list
MC – missed calls list
RC – received calls list
•
wait for response:
Response
Reason
Action
OK
selected PB is now active
Proceed ahead
ERROR
some error occurred
Enable extended result codes
(see par. 2.5.2.1)
and retry.
+CME ERROR: 10
SIM not present
Check SIM or require SIM
insertion and repeat from par.
2.5.2.2
+CMS ERROR: 310
SIM not present
Check SIM or require SIM
insertion and repeat from par.
2.5.2.2
+CME ERROR: 11
SIM is present and PIN is
required to continue operations
insert SIM PIN (see par.
2.5.2.3)
+CMS ERROR: 311
SIM is present and PIN is
required to continue operations
insert SIM PIN (see par.
2.5.2.3)
+CME ERROR: 12
SIM is present and PUK is
required to continue operations
insert SIM PUK (see
par.2.5.2.4)
+CMS ERROR: 316
SIM is present and PUK is
required to continue operations
insert SIM PUK (see
par.2.5.2.4)
+CME ERROR: 13
SIM defect
Check SIM insertion or require
a new SIM not defected and
repeat from par. 2.5.2.2
+CMS ERROR: 313
SIM defect
Check SIM insertion or require
a new SIM not defected and
repeat from par. 2.5.2.2
+CME ERROR: 14
SIM is busy
retry later
+CMS ERROR: 314
SIM is busy
retry later
+CME ERROR: 15
SIM is wrong type
Check SIM, it must be a GSM
SIM.
+CMS ERROR: 315
SIM is wrong type
Check SIM, it must be a GSM