Rainbow Electronics MAX9135 - Manual (Page 4)

MAX9132/MAX9134/MAX9135
Programmable, High-Speed, Multiple
Input/Output LVDS Crossbar Switches
4 _______________________________________________________________________________________
PARAMETER SYMBOL CONDITIONS MIN TYP MAX UNITS
V ID = 200mV, V COM = 1.2V, 840Mbps clock
pattern; input transition time (20% to 80%) =
200ps 10 30 ps
Output Peak-to-Peak Jitter
(Pr eem p hasi s O n)
t J
V ID = 200mV, V COM = 1.2V, 840Mbps
2 23 - 1 PRBS pattern; input transition time
(20% to 80%) = 200ps
85 180 ps
Propagation Delay t D 2 ns
LVDS Switchover Time t
LON
S w i tchover ti m e fr om one channel to another 100 ns
LV D S w i th P r eem p hasi s Am p l i tud e |V
ODPE
|
50 Ω differential (100Ω double termination)
load, 840Mbps
335 530 680 mV
I 2 C TIMING
CLK Frequency f SCL 400 kHz
Start Condition Hold Time t HD:STA (Figure 1) 0.6 µs
Low Period of SCL Clock t LOW (Figure 1) 1.3 µs
High Period of SCL Clock t HIGH (Figure 1) 0.6 µs
Repeated START Condition
Setup Time
t SU:STA (Figure 1) 0.6 µs
Data Hold Time t HD:DAT (Figure 1) 0 0.9 µs
Data Setup Time t SU:STA (Figure 1) 100 ns
Setup Time for STOP Condition t SU:STO (Figure 1) 0.6 µs
Bus Free Time t BUF (Figure 1) 1.3 µs
Note 2: Parameters are 100% production tested at T A = +25°C, unless otherwise noted.
Note 3: I 2 C timing parameters are specified for fast-mode I 2 C. Maximum data rate = 400kbps.
Note 4: Parameters are guaranteed by design.
AC ELECTRICAL CHARACTERISTICS (continued)
(V AVDD = V DVDD = V LVDSVDD = +3.0V to +3.6V, T A = -40°C to +105°C, unless otherwise noted. Typical values are at V AVDD =
V DVDD = V LVDSVDD = +3.3V, T A = +25°C.) (Notes 3, 4)