RocketFish RF-TVMP40 - User Manual - Manual (Page 19)

19 Need help? Call 800-620-2790
RF-TVMP40 TV Wall Mount
STEP 11 - Adjusting the setting for pan tension
1 Remove the bolt cover from the adjustment bolt.
2 To increase or decrease the pan tension, use a 1/2” (13 mm) socket wrench.
3 Replace the bolt cover to the adjustment bolt.
You’ll need
Increase
If your TV moves too easily from
side to side, increase the tension.
Decrease
If your TV doesn’t move easily
enough from side to side,
decrease the tension.
Adjusting the factory-set tension
Socket wrench w/1/2” (13 mm) socket
RF-TVMP40_13-0238_MAN_V1_ENG.fm Page 19 Monday, April 15, 2013 1:26 PM