RocketFish RF-HTS100 - Quick Setup Guide - Manual

QUICK SETUP GUIDE
Before using your new product, please read these
instructions to prevent any damage.
2-outlet Flat-panel
Surge Protector
with Noise Filtering
RF-HTS100
Congratulations on your purchase of this Rocketfish Surge Protector
with noise filtering.
Your surge protector:
• Provides surge protection for sensitive electronic devices
• Incorporates noise filtering to provide “clean” power that will
maximize the performance of your equipment
Features
• Compact design—Fits conveniently behind a wall-mounted
flat-panel TV.
• 43 dB EMI/RFI noise filtering—Ensures that your devices
receives only clean power for maximum product performance.
• 1,200 joules surge protection—Protects your devices from
damaging power surges and spikes.
• LED indicator—Keeps you informed of the surge protection and
grounding status.
• Protected/Grounded—Lights when the surge protection feature
is working correctly and correct wiring is detected. If this LED
does not light when initially plugged in, your surge protector
has detected incorrect wiring. We recommend that you contact
a certified, licensed electrician to inspect your wiring. If this
light goes out, the surge protection feature has reached full
capacity and can no longer absorb additional surges and spikes.
We recommend replacing your surge protector.
Operating instructions
1 Plug your surge protector into a standard 120V AC outlet.
Note: Use the lower outlet if you want to use the upper outlet for
another power cord.
2 Plug one or two devices into your surge protector.
Standard
outlets
LED
indicator