RocketFish RF-BTR212 - Quick Setup Guide - Manual

LED indicator:
• Lights blue when paired and connected to your Bluetooth device.
• Blinks blue when not connected to your Bluetooth device.
• Turns off when the AC/DC adapter is not connected or plugged in.
Optical digital
audio cable
6 ft 3.5 mm stereo
audio cable
3.5 mm jack to RCA stereo
audio plug adapter
OR
Audio receiver or other audio
device with analog or digital input
Wirelessly stream music from your iPhone, iPad, or other Bluetooth-enabled device to your
home stereo or other audio device.
Package contents
• Bluetooth Music Receiver • 6 ft 3.5 mm stereo audio cable
• AC/DC adapter • 3.5 mm jack to RCA stereo audio plug adapter
• Quick Setup Guide
Features
• aptX® audio decoding: The highest Bluetooth stereo audio quality possible
• Optical digital audio output: The highest quality audio connection to your home stereo
• Analog stereo audio output: easily connect to amplified speakers or any device with an audio
input jack
• Wireless range up to 33 feet (10 m)
• Wall mount feature
• Remembers up to eight Bluetooth devices
Note: Music can be played from only one device at a time.
Front view Back view
Top view Bottom view
Setting up your Bluetooth Music Receiver
You can choose either analog (good) or digital (best) cables to connect your Bluetooth
Music Receiver, depending on the connections available on your home stereo system.
Digital connection
1 Plug one end of an optical digital audio cable into the OPTICAL jack on your Bluetooth Music
Receiver.
2 Plug the other end of the optical digital audio cable into the Optical Digital Audio In jack on
your home stereo system.
OR
Analog connection
1 Plug one end of the 6 ft 3.5 mm stereo audio cable (included) into the Audio Out jack on your
Bluetooth Music Receiver.
2 Plug the other end of the 6 ft 3.5 mm stereo audio cable into the Audio In jack on your home
stereo system or other audio component. If your home stereo system does not have a 3.5 mm
Audio In connector, you must use a 3.5 mm jack to RCA stereo audio plug adapter (included).
QUICK SETUP GUIDE
Bluetooth Music Receiver
RF-BTR212
Connecting power:
1 Plug the AC/DC adapter into the DC 5V jack on your Bluetooth Music Receiver.
2 Plug the AC/DC adapter into a wall power outlet. The LED indicator begins to blink blue to
indicate that the unit is on and ready to be paired to your Bluetooth devices.
Pairing your devices using Bluetooth
Before you can use your Bluetooth Music Receiver with a Bluetooth device, you need to pair
your device to the Bluetooth Music Receiver.
To pair your devices using Bluetooth:
1 Make sure that a compatible Bluetooth device (like a music player or phone) is turned on
and within 33 feet (10 meters) of your Bluetooth Music Receiver.
2 Turn on your Bluetooth Music Receiver by plugging in the AC/DC adapter. The LED indicator
blinks on and off slowly. Your Bluetooth Music Receiver is in pairing mode.
3 Go to the Bluetooth manager by doing the following:
a For iPad/iPhone/iPod touch:
i. From your iPad/iPhone/iPod touch home page, click Settings.
ii.
From Settings, click General.
iii. From General, click Bluetooth.
b For Android Phone/Tablet:
i. From your smart phone/tablet home page, click Settings.
ii. From the Settings menu, click Wireless and networks.
iii. Click to activate Bluetooth.
iv.
Click Bluetooth settings.
4 On the Bluetooth device, select Music Receiver in the list of found devices.
5 On the Bluetooth device, enter 0000 as the PIN, if prompted. The LED indicator lights blue on
the Bluetooth Music Receiver.
6 If you are pairing with a computer, make sure that your Bluetooth Music Receiver is selected
as the computer’s default playback device. See the computer’s documentation for
instructions.
LED
indicator