Speedhut 2003-2009 Dodge Ram and 2010-2012 Dodge Ram Pillar User Manual

Speedhut For the car

STEP ONE: Remove stock pillar.

STEP TWO: Install gauges in new pillar.

STEP THREE: Tape or secure gauge wiring to back of new pillar.

STEP FOUR: Install new pillar in place of old pillar.

STEP FIVE: Use provided screw to hold new pillar in place:

- Make sure screw is aligned with factory hole to avoid cross threading.

- Don’t over tighten the screw.

www.Speedhut.com Need help? Contact us: Speedhut Inc. 165 North 1330 West B2 Orem, Utah 84057 or call 801-221-1460

Models #17212, #17213 is designed to fit 2003+ Dodge Ram (1 long bolt)

Models #17218, #17219 designed to fit 2010+ Dodge Ram (1 short bolt)