Speedhut 2007-2012 Chevrolet Silverado_Duramax (GMC Sierra_Duramax) Pillar User Manual

Speedhut For the car

STEP ONE: Remove stock pillar.

-Screw is located under the cap at the top of the pillar.

STEP TWO: Install gauges in new “replacement” pillar.

STEP THREE: Tape or secure gauge wiring to back of new pillar.

STEP FOUR: Install new pillar in Truck.

STEP FIVE: Use provided screw to hold new pillar in place.

- Don’t over tighten the screw.

www.Speedhut.com Need help? Contact us: Speedhut Inc. 165 North 1330 West B2 Orem, Utah 84057 or call 801-221-1460

Models #17115, #17116, #17117, and #17118 (needs screw)