Grain Systems PNEG-1745 - Manual (Page 31)

4. WatchDog Operation
PNEG-1745 WatchDog 31
For example, pressing the button will bring up the timer minutes modification dialog box
shown in Figure 4F . Enter the number of minutes and press OK.
Figure 4F
Another dialog box will then appear prompting the second’s setpoint to be entered as shown in Figure 4G .
Figure 4G
Depending on the security settings of the particular browser you may have to temporally allow
scripted windows. Using Internet Explorer, simply right click and select OK and press Timer button again.
All other timer setpoints are set similarly.
Temperature Button
Pressing the button will bring up a screen very similar to that shown in Figure 4H on Page 32 .
It may vary slightly depending on the dryer’s setup. The current setpoint of each plenum and grain column
temperature is shown to the right of each setpoint button.