Grain Systems PNEG-1708 - Manual (Page 36)

8. Assembling Ladders, Platforms and Catwalks
36 PNEG-1708 GSI Modular Tower Dryer
3. Snug bolt safety cage hoops to safety cage brackets. (See Figure 8E and Figure 8F.)
Figure 8E Figure 8F
4. Snug bolt seven (7) vertical supports to safety cage hop halves. (See Figure 8G.)
5. Snug bolt top safety cage assembly to outside ladder brackets. (See Figure 8G.)
6. Tighten all bolts.
7. Use splice plate between ladders sections to connect. (See Figure 8H.)
Figure 8G Figure 8H
WARNING
LADDER BOLTS - insert bolts toward outside of ladder, so climbers do not snag
on bolt shafts.
WARNING
Install all formed ladder sections so rungs with rough, textured side for
gripping are on top, so climbers do not slip.