Grain Systems PNEG-1708 - Manual (Page 35)

8. Assembling Ladders, Platforms and Catwalks
PNEG-1708 GSI Modular Tower Dryer 35
Installing Outside Ladder with Safety Cage
Outside Ladder Bracket
Outside ladder brackets are not pre-installed prior to shipping. Pre-assemble safety cages on the ground
prior to attaching to the dryer.
Top Safety Cage
Pre-assemble the top safety cage as follows. (See Figure 8C, Figure 8D below and Figure 8F to
Figure 8H on Page 36.)
1. Snug bolt one formed ladder section to two (2) outside ladder stiffeners. Snug bolt four (4) safety
cage brackets to outside ladder stiffeners. (See Figure 8C.)
Figure 8C
2. Bolt pairs of safety cage hoop halves together. (See Figure 8D.)
Figure 8D