Atdec Telehook TH-VWV Installation manual - Manual

Step 2. Mounting Brackets
If the distance between the top of
the display & mounting bracket is
80mm and under, mount directly
onto the screen.
Mount the brackets as close to the
top of the display as possible.
0~80mm
80~165mm
Spacer
NOTE: The top of the bracket must not be higher than the top of the screen.
If the distance between the top of the
display & mounting bracket is between
80 and 165mm, mount using included
spacers.
Installation Instructions TH-VWV
TH-VWP-100
TH-VWP-160
Component Checklist
Universal Video Wall
! IMPORTANT - Install Telehook Video Wall as per installation instruction.
! This product supports a maximum load of 165kg (363lbs.) per panel or screen.
! The manufacturer accepts no responsibility for incorrect installation.
IMPORTANT INFORMATION:
Step 1. Check Components
Check you have received against the component checklist and hardware above.
Mounting Bracket (x2)
TH-VWV
Wall Plate (1.6m)
TH-VWP-160
Wall Plate (1m)
TH-VWP-100
HARDWARE
Mounting Brackets
(TH-VWV) Wall Plate 1m
(TH-VWP-100)
Wall Plate 1.6m
(TH-VWP-160)
Coach Screw
(x2)
Coach Screw
(x3)
M6 x 16/30/45/60
(x4)
M8 x 16/30/50/65
(x4)
Nylon
Anchor (x2)
Nylon
Anchor (x3)
8mm Washer (x2)
8mm Washer (x3)
Tools Required:
• Power Drill
• 8mm (0.31”) Drill Bit
• 10mm (0.39”) Masonry Drill Bit
• 13mm (0.51”) Socket Wrench
Shifter
• Phillips Head Screwdriver
• Spirit Level
• Tape Measure
Option A Option B
M6 Washer (x8)
Spacer (x8)