Atdec Spacedec SD-POS-VBM-B2B Technical specs - Manual

Cable Access Hole
37mm x 43mm
(1.46” x 1.69”)
NOTE: If cable access
through the post and work
surface is required, you will
need to drill a Ø45mm
(1.77”) cable access hole.
(Refer to Installation
Instructions.)
Rotation
Your POS Multi offers 355° of Rotation.
This can also be limited to suit a specific
application.
The Direction in which you mount POS Multi
will determine where the 5° gap in Rotation
is located, and how you choose to limit the
rotation.
OR
USER USER
5° Gap in
Rotation
5° Gap in
Rotation
270°
180°
0°
90° 270°
180°
0°
90°
355°
355°
Direction
Arrow
Direction
Arrow
No portion of this document or any artwork contained herein should be reproduced in any way without the express written consent of Atdec Pty Ltd.
Due to continuing product development, the manufacturer reserves the right to alter specifications without notice. Published: 09.03.11 ©
0° Locking Hole (Fixed)
0-180° Locking Hole
0-270° Locking Hole
0-90° Locking Hole
Direction Arrow
Locking Holes
(Refer to Installation Instructions for further details)
168mm
(6.61”)
Back to Back Mount
±20° Rotation
about central
axis
VESA Ball Mount
Each Ball Assembly has 40 degrees rotation about it’s
central axis.
Rotation Options
0° Rotation (Fixed)
0-90° Rotation
0-180° Rotation
0-270° Rotation
0-355° Rotation
Mounting Hole Options
Technical Specifications
Display | POS Multi
6'3269%0
Dimensions
OD
Ø50.8mm
(2”)
370mm
(14.57”)
330mm
(13”)
390mm
(15.35”)
84mm
(3.30”)
244mm
(9.5”)
Ø106mm
(4.17”)
Mounting Plate Footprint
137mm (5.39”) 84mm
(3.30”)
70.7mm
(2.78”)
M4 Tapped
Holes
ID
Ø46mm
(1.81”)
Install Security
Cable around
Internal Post
100mm
75mm
75mm 100mm
6'3269%0%%
NOTE:
! This product has been designed to mount VESA compliant displays with 75mmx75mm and 100mmx100mm hole patterns only.
! It will support displays upto a maximum weight of 20kg (44lbs). The Back-to-Back Mount will support 2x20kg (88lbs) displays.
! Warranty: 10 years limited