Atdec Telehook TH-3260-UFB Installation manual - Manual

Component Checklist
Bits Bag
Installation Instructions
Telehook
32”-60” wall fixed
Mounting the Wall Plate A
Timber Stud Wall Masonry Wall
display Bracket (x2)
wall Plate
Coach Screw (x4) Masonry wall Plug (x4) washer (x4)
Recessed Hole Bush (x4)
washer
Masonry
wall Plug
wall Plate
12mm ( 1 /
2
”)
Hole
TIP: Use a spirit
level to ensure the
wall plate is
horizontal
Note: ensure the Wall Plate
is mounted with the folded
tabs pointing upwards.
Coach Screw
8mm ( 5 /
16
”)
Hole
Important Notes
ToolS ReQUIReD:
l
Power drill
l
12mm or 8mm drill Bit
l
Phillips Head Screw driver
l
Spirit level
l
17mm ( 11 /
16
”) Socket wrench
or Shifter
l
The Telehook 32-60 wall fixed supports lCd and Plasma flat Panel displays from 32” (81cm)
to 60” (152cm) and supports a maximum load of 91kgs (200lbs).
l
This product suits displays with mounting hole patterns from 180mm to 740mm wide (7”-29”) by 93mm to
500mm high (3 11/16 ”-20”).
l
The manufacturer does not accept responsibility for incorrect installation.
Security Bracket (right)
Security Bracket (left)
Multi washer (x4) Spacer Bush (x4)
Mounting Screws
M8x15mm / M8x35mm / M8x45mm (x4 each)
M6x15mm / M6x35mm / M6x45mm (x4 each)
M5x15mm / M5x35mm / M5x45mm (x4 each)
M4x15mm / M4x35mm / M4x45mm (x4 each)
Cross Recess Screws
TIP: Use a spirit
level to ensure the
wall plate is
horizontal
Note: ensure the Wall Plate
is mounted with the folded
tabs pointing upwards.
wall Plate
Coach Screw washer
Timber
Stud