VEGA VEGATOR 632 - Manual (Page 42)

You find detailed information on how to trigger a fault signal via the
second relay output in the previous chapter "Adjust relay function".
10 .6 Master/Slave function
When connecting two VEGATOR 632 signal conditioning instruments,
one instrument must be configured as reference power supply unit
(Master) and one as Slave.
Adjust the respective instrument as Master or Slave with switch 8 of
the DIL switch block (A).
To ensure that the two VEGATOR 632 can synchronize their phases, a
connection cable is required between the two signal conditioning
instruments.
Connect this connection cable according to the following illustration
between terminals 10 of the signal conditioning instruments.
Master Slave
VEGA
TOR
632
3 2
Master / Slave
1 5 4 1
7 8 9 10
3
2
5
4
1
7 8 9 10
2
VEGA
TOR
632
1
8 8
1
2 max
3 min
4 max
5 min
Fig. 131: Connection cable between terminals 10
Definition of the instru-
ment as Master or Slave
(DIL switch block A)
42 VEGATOR 632 • Signal conditioning instrument
10 Set up - Four-channel control
35243
-EN
-120228