VEGA VEGATOR 632 - Manual (Page 14)

Fig. 6: Additional electronics for line break monitoring in conjunction with a
conductive probe
1 Connect the eyelet according to the following illustration.
Make sure that the eyelets have no contact to other metal parts.
2 Open one of the other terminals and attach the additional
electronics.
3 Tighten the terminal.
1
2
Fig. 7: Mounting of the additional electronics for line break monitoring
1 Connection to terminal 1 (ground rod = longest rod)
2 Connection to terminal 2 (max. rod = shortest rod)
3 Additional electronics for line break monitoring
If you are using a probe without additional electronics for line break
monitoring, a fault signal will be triggered.
Keep in mind that in case of a fault signal also the switching output will
be activated.
Only failures of channel 1 are monitored.
14 VEGATOR 632 • Signal conditioning instrument
5 Connecting to power supply
35243
-EN
-120228