VEGA VEGAMET 514 - Manual (Page 34)

34 VEGAMET 514
514Ex
CONNECT
100
OK ESC
on
514Ex
CONNECT
100
OK ESC
on
Input no. 1: VBUS input (measured value)
Input no. 4: Correction input
Input
no. 4
Input
from
local
Met
Chan-
nel no.
K1
Input
undef-
ined
7.4 Configuration of inputs
Settings in the "extended menu"
Confi-
gura-
tion
Config
inputs
Input
no. 1
Input
from
local
Met
Chan-
nel no.
S1
Sensor
char-
acter-
istics
Min.
meas.
range
0,00
Max.
meas.
range
1,00
Min.
sensor
value
4,000
Max.
sensor
value
20,000
TAG -
No. 1
%
xx,x
Param.
TAG-
No. 1
MET02
MET03
MET04
….
Input
undef-
ined
Input1
Input2
Input3
Input local MET:
Here you can select another VEGAMET (e.g.
Met 04) and hence determine that the input
signal should not be taken from a directly
connected sensor, but from a VEGAMET
connected over the DISBUS (e.g. VEGAMET
514). The selected VEGAMET number corre-
sponds to the DISBUS address of the instru-
ment (see chapter 4.1).
If another VEGAMET has been chosen, the
menu item "Input undefined" appears in which
you can adjust the input number of the other
VEGAMET (see illustration).
The menu items "Min. meas. range" and "Max.
meas. range" are only visible with hydrostatic
pressure transmitters. Sensor values are
stated in the test certificate of the hydrostatic
pressure transmitter.
DISBUS
MET 04
Input 1
"local MET"