VEGA VEGAMET 514 User Manual
Operating instructions, Vegamet 514, Level and pressure
Table of contents
Document Outline
- Contents
- 1 Product description
- 1.1 Function and configuration
- 1.2 Approvals
- 1.3 Features
- 1.4 Technical data
- 1.5 Dimensions
- 2 Mounting
- 3 Electrical connection
- 3.1 Connection instructions
- 3.2 Connection instructions for Ex approved applications
- 3.3 Wiring plan
- 4 Adjustment
- 4.1 Indicating and adjustment elements
- 4.2 Adjustment system
- 4.3 Adjustment via PC
- 4.4 Configuration and parameter adjustment
- 4.5 Comparison: reduced menu - extended menu
- 5 Setup
- 6 Settings in the "reduced menu"
- 6.1 Configuration of measurement loop
- 6.2 Adjustment with medium
- 6.3 Adjustment without medium
- 6.4 Scaling
- 6.5 Integration time
- 6.6 Output
- 6.7 Simulation
- 6.8 Password, language, default, reset, menu mode
- 7 Settings in the "extended menu"
- 7.1 Configuration of measurement loop
- 7.2 Tare
- 7.3 Monitoring
- 7.4 Configuration of inputs
- 7.5 Configuration of outputs
- 7.6 Adjustment
- 7.7 Conditioning
- 7.8 Parameter adjustment of outputs
- 7.9 Simulation
- 7.11 Password, language, menu mode
- 7.10 Special function: Reset
- 7.12 Special function: Manual correction
- 7.13 Linearisation curves
- 7.14 Info
- 7.15 Reset VEGAMET
- 8 Measured quantity and units
- 9 Diagnostics
- 9.1 Maintenance
- 9.2 Simulation
- 9.3 Fault signal
- 9.4 Repair
- 9.5 Error codes
- 10 Menu schematics
- 10.1 Menu schematic "reduced menu"
- 10.2 Menu schematic "extended menu"
- Safety information
- Note Ex area