Veris Industries HT SERIES Install - Manual (Page 3)

VERIS INDUSTRIES
™
inStallation GUiDe Ht SerieS
Z203269-0P PAGE 3 ©2010 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 06101
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
ht calibration instructions
1. Temperature calibration allows for calibration offset of ±10º F, user discretion.
RH and TEMP can be field calibrated by moving RUN/CAL jumper to CAL position.
2. Relative humidity allows for calibration offset of ±10% RH, user discretion.
ht oPeration instructions
- +
Enter
Display screen
Scroll down
Select
Scroll up
Normal Operation
Temperature Selection
Use the (+) and (-) buttons to scroll to the Thermostat mode:
Humidity Selection
Use the ( +) and (-) buttons to scroll to the Humidistat mode:
press ± to change, press * to select
S E T P O I N T
4 5 % R H
S E T P O I N T
7 0 F
press ± to change, press * to select;
setpoint in ˚C if Celsius units are selected
4 5 . 5 % R H
6 8 . 5
º F
NORMAL MODE