Veris Industries H938 SERIES Datasheet - Manual

current monit
oring
VERIS INDUSTRIES
800.354.8556 +1 503.598.4564 www.veris.com
Status And Control In
One Package
DESCRIPTION
The Hawkeye Relay Combination Series is the ideal solution for the automation
installer. These units combine a current switch and relay into a single package,
reducing the space required for total control of fans and pumps. The current
switch and relay operate independently of one another. These devices allow
start/stop control and status monitoring with one device instead of two.
APPLICATIONS
● Starting/stopping and monitoring positive status of motors
● Detecting belt loss and coupling shear
FEATURES
● Combines command relay and fan/pump status sensor in a single, easy to install
unit
● Reduces number of components installed...fits better in small starter enclosures
● Detect belt loss and motor failure...ideal for fan and pump status
● H748 and H948 feature a SPDT command relay...control two outputs with a
single relay
● Bracket on H938, H948, and H958 can be installed in three different
configurations...added flexibility
●
Reduced charges from electrician
● Relay and status LEDs for easy setup
● Polarity insensitive status output...fast and easy installation
● Adjustable setpoint for current sensor status...fits many applications
● 5-year warranty
Maximize Reliability
Minimize Installed Cost
SPECIFICATIONS
Sensor Power Induced from monitored conductor
Insulation Class 600VAC RMS
Frequency Range 50/60 Hz
Temperature Range -15° to 60°C (5° to 140°F)
Humidity Range 10-90% RH non-condensing
Hysteresis 10% Typical
Terminal Block Wire Size 24-14 AWG (0.2 to 2.1 mm 2 )
Terminal Block Torque 3.5 to 4.4 in-lbs (0.4 to 0.5 N-m)
Agency Approvals UL 508 open device listing
Do not use the LED status indicators as evidence of applied voltage.
Current Switches with Relay:
Adjustable Trip Point
Year
Warranty
5
Voltage AC DC
24V................................... 10mA 10mA
12V.................................................................... 20mA
TYPICAL COIL PERFORMANCE
Hx38, Hx58 (SPST, N.O.)
Resistive..................................10A@250VAC, 30VDC
Inductive.................................5A@250VAC, 30VDC
H735 (SPST, N.O.)
Resistive..................................5A@250VAC, 30VDC
Inductive.................................3A@250VAC, 30VDC
RELAY CONTACT RATINGS
Hx48 (SPDT)
Resistive.................................. 8A@250VAC, 30VDC
Inductive................................. 3.5A@250VAC, 30VDC
Pull In Voltage
Hx3x .............................................................. 20.1VDC
Hx48 .............................................................. 20.1VDC
Hx58 .............................................................. 8.4VDC
Drop Out Voltage
Hx3x .............................................................. 5.2VDC
Hx48 .............................................................. 5.2VDC
Hx58 .............................................................. 3.0VDC
H738 H938
H738 & H938 SERIES
TM
DETECTS BELT LOSS/COUPLING SHEAR! DETECTS BELT LOSS/COUPLING SHEAR!
Now you can easily detect when drive belts slip, break, or pump couplings shear.
In fact, a typical HVAC motor that loses its load has a reduction of current draw
of up to 50%. That’s why our sensors are the industry standard for status.
Calibrated
Trip Point
Off Off
Fan/pump
On
Loss of Belt/Coupling Shear
Electrical
Failure
HQ0001760.B 01131