Veris Industries H5xx SERIES Datasheet - Manual

current monit
oring
VERIS INDUSTRIES
800.354.8556 +1 503.598.4564 www.veris.com
DESCRIPTION
The Hawkeye 5xx Series combines an industrial grade load-switching relay,
current status switch, and Hand-Off-Auto (HOA) switch in an easy-to-install
remote enclosure, making the series ideal for monitoring, directly controlling, and
troubleshooting the control wiring of fractional horsepower motors.
The relay, current sensor, and HOA switch are combined in a series circuit. Once an
H5xx is wired in series between the power source and motor, all three components
are installed. The housing provides physical separation and multiple wiring exits to
isolate control and high voltage wiring. An H5xx can be mounted directly on 2- or
4-gang junction boxes, nippled to a field enclosure, or stand alone.
APPLICATIONS
● Monitoring status and controlling small motor loads that are not driven by a
motor starter or contactor
• Exhaust fans
• Unit ventilators
• Fan terminal units
• Fan coil units
• Recirculating pumps
FEATURES
● Remote mounted current status sensor and command relay with or without
HOA switch
● Combines status sensor, command relay, and HOA switch in a single series
circuit...one line connection for three devices
● Remote mounted enclosure eliminates the need to cram multiple devices
into a junction box
● HOA provides true relay control...ideal for troubleshooting control wiring
● SPST relay is field-selectable for N.O. or N.C. operation
● All models rated up to 1HP@120VAC, NS Versions 1HP@120VAC and
1.5HP@277VAC... one product for all fractional HP motor control and
status applications
● Mounts directly on gang boxes, flush to existing enclosures or stand alone...
maximum installation flexibility
● 5-year warranty
Combination Switching
Relay, Current Status
Switch, and HOA Switch
Field Mount Motor
Control Device
SPECIFICATIONS
Sensor Power Induced from monitored conductor
Frequency Range 50/60 Hz
Humidity Range 10-90% RH non-condensing
Temperature Range -15° to 50°C (5° to 122°F)
Terminal Block Wire Size 24-14 AWG (0.2 to 2.1 mm 2 )
Terminal Block Torque 3.5 to 4.4 in-lbs (0.4 to 0.5 N-m)
Agency Approvals UL 508 open device listing
Do not use the LED status indicators as evidence of applied voltage.
Maximize Reliability
Minimize Installed Cost
Year
Warranty
5
CONTACT RATINGS RELAY
Voltage AC DC
24V ..................................................... 36mA 36mA
TYPICAL COIL PERFORMANCE
SPDT (NS) Models
SPST (HOA) Models
Resistive..........15A@277VAC
Motor...............1HP@120VAC
1.5HP@277VAC
Resistive..........15A@250VAC
Motor...............1HP@120VAC
H535 H548
H5xx SERIES
TM
HQ0001771.B 01131