Veris Industries 133 Manual - Manual (Page 12)

WARRANTY
Please refer to product warranty card for
warranty statement.
22
G. TROUBLE SHOOTING GUIDE
Problem Probable Causes
Does not power up
• Dead or defective battery
• Broken wire from battery
snap to PCB
Won’t display current readings
• Open fuse
• Open test lead
• Improperly connected to
circuit under test
All functions except ohms read high
• Very weak battery that will
not turn on the low battery
indicator on the LCD
ACV do not read
• Very weak battery that will
not turn on the low battery
indicator on the LCD
Test Products International, Inc.
9615 SW Allen Blvd., Ste. 104
Beaverton, OR USA 97005
503-520-9197 • Fax: 503-520-1225 • [email protected]
Test Products International plc
2 Newcourt Business Park
Perry Road
Harlow, Essex CM18 7PR
England
Tel: 01279 439647 • Fax: 01279 450553
L133M • 12/1/97 copyright © 1997 Test Products International, Inc.