Veris Industries VS861 SERIES Datasheet User Manual
Solid state relays, Higher reliability than electromagnetic relays, Vs861 series

REL
AY
S
VERIS INDUSTRIES
800.354.8556
+1 503.598.4564
www.veris.com
Solid State Relays
DESCRIPTION
The new DIN-Mountable VS861 Series Solid State Relay with an internal heat
sink is the first complete solid state relay with no moving parts available in a
modular package.
A SSR (solid state relay) can perform many of the same tasks as an EMR
(electromechanical relay). The SSR differs in that it contains no moving mechanical
parts. It is essentially an electronic device that relies on the electrical, magnetic, and
optical properties of semiconductors and electrical components to achieve its
isolation and relay switching function.
APPLICATIONS
●
Lighting
●
Traffic control
●
Instrumentation systems and alarm systems
●
Industrial automation
FEATURES
●
No moving parts to wear or fail
●
No contact bounce or arcing contacts
●
Reduced EMI
●
Longer life than electromechanical relays
●
Superior performance where fast response time or high frequency of on/off
cycling are required
Higher Reliability Than
Electromagnetic Relays
SPECIFICATIONS
Output Characteristics:
Switching Voltage
VS861210DC(AC) & VS861208DC(AC): 24...280VAC , VS861208DD: 3...150VDC
Maximum Zero Turn-on Voltage (Vpk)
VS861210DC(AC) & VS861208DC(AC): 35μS
Maximum Rate of Rise off State Voltage (dv/dt)
VS861210DC(AC): 500μS, VS861208DC: 475μS, VS861208AC: 350μS
Incandescent Lamp Ampere Rating (RMS)
VS861210DC(AC): 8A, VS861208DC(AC): 5A
Motor Load Rating (RMS)
VS861210DC(AC): 4.5A, VS861208DC(AC): 3A
Min. Load Current to Maintain On
VS861210DC(AC): 50mA, VS861208DC(AC): 150mA, VS861208DD: 20mA
Non-Repetitive Surge Current (1 cycle)
VS861210DC(AC): 500A , VS861208DC(AC): 200A, VS861208DD: 35A
Max. RMS Overload Current (1 sec.)
VS861210DC(AC) & VS861208DC: 24A, VS861208(DD): 17A
Max. Off State Leakage Current (RMS) 10mA
Typical On State Voltage Drop (RMS) 1.25VAC
Max. On State Voltage Drop (RMS)
VS861210DC(AC) & VS861208DC(AC): 1.6VAC, VS861208DD: 1.6VDC
Input Characteristics:
Must Release Voltage
VS861210DC, VS861208DC, & VS861208DD: 1VDC, VS861210AC & VS861208AC: 10VAC
SP (Nominal) Input Impedance
VS861210DC, VS861208DC, & VS861208DD: Current Regulator; VS861210AC & VS861208AC: 16...25kΩ
Typical Input Current @ 5VDC or 240VAC
VS861210DC: 16mA, VS861210AC, VS861208DC(AC), & VS861208DD: 12mA
Reverse Polarity Protection
VS861210DC, VS861208DC, & VS861208DD: Yes
Other Characteristics:
Operating Time (Response Time)
VS861210DC & VS861208DC: 8.3msec; VS861210AC & VS861208AC: 40msec; VS861208DD: 5msec
Release Time
VS861210DC & VS861208DC: 8.3msec; VS861210AC & VS861208AC: 80msec; VS861208DD: 5msec
Rated Insulation Voltage/Dielectric Strength 2500VAC
Operating Temperature Range
-30° to +80°C (-22° to 176°F)
Thermal Resistance (Junction to Case)
VS861210DC(AC): 0.66°C/W, VS861208DC(AC): 2.0°C/W, VS861208DD: 0.5°C/W
Integral Heat Sink 4.0°C/W
Year
Warranty
5
VS861210DC
VS861 SERIES
HQ0001855.B 01131