Veris Industries AA16A Install - Manual

Installation Guide
Accessories
Z205568-0D Page 1 of 2 ©2013 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 06133
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
TM
NOTICE
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classified locations.
• Read and understand the instructions before installing
this product.
• Turn off all power supplying equipment before working on it.
• The installer is responsible for conformance to all applicable codes.
No responsibility is assumed by Veris Industries for any consequences arising out of the
use of this material.
Product Identification
Part Number Description
AA14A Bracket and Manifold with Wiring Elbow, Fittings, and Screws
AA16A Bracket and Manifold with PWxxxx, Fittings, and Elbow Installed at Factory (PWxxxx must be ordered as
a separate item)
Product Overview
The AA14A and AA16A bypass valve manifolds are intended for use with the PW and PW2 series pressure
transducers. The manifold allows easy commissioning of the PW sensor.
The PW sensor is sold as a separate item. If purchasing the AA16A, the PW and fittings are connected to the bracket
and the manifold at the factory. If purchasing the AA14A, the PW is installed by the customer.
AA14A, AA16A
Bypass Valve Manifold and Mounting Bracket
for PWxxxx Sensor (sold separately)
AA14A
AA16A
Dimensions
6.75”
(172 mm)
8.7”
(221 mm)
8.7”
(221 mm)
7.75”
(191 mm)
1.8”
(46 mm)
3.5”
(89 mm)
3.5”
(89 mm)
0.4”
(11 mm)
1.0”
(25 mm)
12.0”
(305 mm)
0.5”
(13 mm)
1.5”
(38 mm)
0.3”
(8 mm)