Veris Industries H120 SERIES Datasheet User Manual
Field mount status relay, Spst status relay with integral current switch, H120 series

current monit
oring
VERIS INDUSTRIES
800.354.8556
+1 503.598.4564
www.veris.com
SPECIFICATIONS
Sensor Power
Induced from relay coil power
Operating Temperature
-15° to 60°C (5° to 140°F) (13.8A max.), -15° to 50°C (5° to 122°F) (20A max.)
Operating Humidity
10-90% RH non-condensing
Expected Relay Life (mechanical)
10 million cycles
Relay Status
LED ON=energized
Wire Specifications:
Lead Length
14” (356 mm) min.
Gauge
UL1015; Coil: 18 AWG; Contacts: 12 AWG; Status: 16 AWG
Agency Approvals
UL 508 open device listing
Do not use the LED status indicators as evidence of applied voltage.
DESCRIPTION
The H120 and H120NC offer a fixed current switch and SPST relay in a single
externally mounted housing. Combining the current sensor and relay in one easy-
to-install package eliminates the need to fit multiple devices into small electrical
enclosures and simplifies the installation. Eliminate the labor associated with
installing a separate current sensor.
APPLICATIONS
●
Unit Ventilators
●
Fan Coil Units
●
Exhaust Fans
●
Fan Terminal Units
●
Fractional HP Motors
●
Light Resistive Loads
SPST Status Relay With
Integral Current Switch
Field Mount Status Relay
FEATURES
●
The current switch and relay are in series...connect the contacts to the load and
your current switch is automatically installed
●
The nipple mount housing can be connected to any 1/2” conduit knockout for
installation versatility
●
Relay coil LED streamlines job commissioning and check out
●
HP ratings make the H120 ideal for control and status of fractional HP motors
●
5-year warranty
●
NEMA 1 rated housing may be used in plenum spaces
●
Can be externally mounted to the electrical enclosure...space saver
●
0.1A turn-on...easily monitors the smallest motors
Year
Warranty
5
H120
H120 SERIES
TM
HQ0001772.B 01131