Veris Industries PG_PV SERIES Install - Manual

Installation Guide
Pressure Sensors
ZL0064-0B Page 1 of 3 ©2013 Veris Industries USA 800.354.8556 or +1.503.598.4564 / [email protected] 06132
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris ‘V’ logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
Other companies’ trademarks are hereby acknowledged to belong to their respective owners.
TM
NOTICE
• This product is not intended for life or safety applications.
• Do not install this product in hazardous or classified locations.
• Read and understand the instructions before installing
this product.
• Turn off all power supplying equipment before working on it.
• The installer is responsible for conformance to all applicable codes.
No responsibility is assumed by Veris Industries for any consequences arising out of the
use of this material.
Product Identification
Product Overview
The PG, PV, PGE, and PVE pressure transducers are compatible with a variety of HVAC and industrial applications.
Volt and mA output options ensure integration with building systems. A wide selection of pressure ranges offers
application flexibility. PG and PV deluxe models have a stainless steel housing, while PGE and PVE standard models
have a stainless steel wetted connector. All models are warranted for a period of five years.
PG/PV Series
Gauge Pressure Sensors
PGE/PVE
PG/PV
Range
03 = 0 to 15 psig
(Deluxe only)
04 = 0 to 25 psig
05 = 0 to 50 psig
06 = 0 to 75 psig
07 = 0 to 100 psig
08 = 0 to 250 psig
09 = 0 to 500 psig
10 = 0 to 1000 psig
11 = 0 to 5000 psig
12 = 0 to 10000 psig
PG
Wetted Material Output
B = 1-5VDC (economy only)
M = 4-20mA
V = 0-10VDC (deluxe only)
J = 0-5VDC (deluxe only)
A
Range
03 = -14.7 to 15 psig
(Deluxe only)
04 = -14.7 to 25 psig
05 = -14.7 to 50 psig
06 = -14.7 to 75 psig
07 = -14.7 to 100 psig
08 = -14.7 to 250 psig
09 = -14.7 to 500 psig
10 = -14.7 to 1000 psig
11 = -14.7 to 5000 psig
12 = -14.7 to 10000 psig
PV
= 316L stainless steel
Output
A
Call factory for ranges not shown.
Type
Blank = Deluxe
E = Economy
Type
Blank = Deluxe
E = Economy
Wetted Material
B = 1-5VDC (economy only)
M = 4-20mA
V = 0-10VDC (deluxe only)
J = 0-5VDC (deluxe only)
= 316L stainless steel
PG/PV only