Veris Technologies pH Manager - Operating Instructions - Manual (Page 10)

Pub.# OM17-MSP-pH
3-2
Sensor DataLogger display readings
Here are the display readings that you will see when operating the Sensor DataLogger:
Starting up…
Figure 4
The unit is ready to operate. The DataLogger is informing you of the firmware version its
programmable interface chip (PIC) contains.
Press any of the four keys, and the next screen will appear:
Figure 5
For EC and pH mapping, press the #1 key. Press 1 and begin acquiring data (see below for more
details). Press 2 and enter Setup menu. (Press 4 to Exit this window).
Figure 6
Press 1 to calibrate ion-selective (ISE) pH electrodes
Calibrating pH electrodes
Enter menu option 1) Calibration.
Figure 7
You will be asked for the ID of the electrode connected to channel 1. You may want to add an ID
number to the electrodes, for your own tracking purposes. Use the 1 and 2 keys to change the
number and 3 to confirm:
Figure 8