Spicer Drive Axles Illustrated Parts List Dana Spicer Service Carrier List - Manual (Page 35)

34
New Service Carriers Tandem Drive Axles
Tandem Drive Axle - Single Reduction Carriers
DS451P - Standard Carrier
16.00" Spiral Bevel Gearing (3.36 - 3.70 Ratio)
16.50" Spiral Bevel Gearing (3.90 - 7.17 Ratio)
Side Gear # 85486
See Note 1. These new carrier units will directly replace models
DS401P and DS451P built with 33 Involute spline side gears with
no modifications. These units can be used as a replacement for
model DS400P when a new yoke and slinger is used. See yoke
section for proper selection.
Side Gear New
Ratio Spline Carrier Notes
3.55 33 Inv 674574
3.70 33 Inv 674474
3.90 33 Inv 674475
4.11 33 Inv 674476
4.33 33 Inv 674477
4.88 33 Inv 674566
5.29 33 Inv 674803
5.57 33 Inv 674816
RS451 - Standard Carrier
16.00" Spiral Bevel Gearing (3.36 - 3.70 Ratio)
16.50" Spiral Bevel Gearing (3.90 - 7.17 Ratio)
Side Gear #85486
These new carrier units will directly replace models RS401
and RS451 built with 33 Involute spline side gears with no
modifications. (See Note 1) These units can be used as a
replacement for model RS400 when a new yoke and slinger is
used. See yoke section for proper selection.
Side Gear New
Ratio Spline Carrier Notes
3.36 33 Inv 675367
3.55 33 Inv 674575
3.70 33 Inv 674479
3.90 33 Inv 674480
4.33 33 Inv 674482
4.88 33 Inv 674567
5.29 33 Inv 674804
Note 1: In Nov. 1995, the models DS/RS451 were produced in
both 33 and 41 Involute side gear configurations. Before ordering
a service carrier verify correct spline count
DS344 - Standard Carrier
15.50" Hypoid Gearing
Side Gear # 127367
These new carrier units will directly replace tandem axle model
DS344 with no modifications.
Side Gear New
Ratio Spline Carrier Notes
2.64 39 Inv 682883
2.85 39 Inv 682884
2.93 39 Inv 682885
3.08 39 Inv 682886
3.25 39 Inv 682887
3.36 39 Inv 682888
3.55 39 Inv 682889
3.70 39 Inv 682890
3.90 39 Inv 682891
4.11 39 Inv 682892
4.33 39 Inv 682893
4.63 39 Inv 682894
4.88 39 Inv 682895
5.29 39 Inv 682896
5.57 39 Inv 682897
6.17 39 Inv 682898
6.50 39 Inv 682899
Note: Carriers listed above have a thick flange design. Use axle
housing hardware kit 512087.
DL344 - Limited Slip Carrier
15.50" Hypoid Gearing
Limited Slip # 130141
These new carrier units will directly replace tandem axle model
DL344 with no modifications.
Side Gear New
Ratio Spline Carrier Notes
6.17 39 Inv 682163
6.50 39 Inv 682164
RL344 - Limited Slip Carrier
15.50" Hypoid Gearing
Limited Slip # 130141
These new carrier units will directly replace tandem axle model
RL344 and 19060L with no modifications.
Side Gear New
Ratio Spline Carrier Notes
6.17 39 Inv 681342
6.50 39 Inv 681343