Ohaus CARAT PLUS PRECISION JEWELRY BALANCES Manual en - Manual (Page 23)

Adventurer Pro EN-21
3.5.5 Animal Weighing (Cont.)
Completed Animal Cycle
The primary display shows the weight of the animal and the secondary display alternates between
ANIMAL and HOLD.
Automatic Mode
The balance returns to the Ready condition when the animal is removed from the pan. If the
Function button is pressed before the animal is removed from the pan, the primary display shows
the actual weight and the secondary display alternates between ANIMAL and CLEAR PAN until the
animal is removed from the pan. The balance then returns to the Ready condition.
Semiautomatic and Manual Modes
Remove the animal from the pan and press the Function button to return to the Ready condition.
If the Function button is pressed while the animal is on the pan, the primary display shows the
actual weight and the secondary display alternates between ANIMAL and CLEAR PAN. The balance
returns to the Ready condition when the animal is removed from the pan. The Animal Weigh level
and mode settings are made in the Mode menu.
3.5.6 Display Hold
The Display Hold Mode allows the user t o capture and store the highest (stable) weight in a series
of weight measurrements. The Display Hold Mode provides the user with three (3) operating
modes: Automatic, Semi-automatic and Manual.
Automatic Mode :
Highest stable weight captured automatically.
Ready for next measurement automatically when pan is cleared.
Semi-Automatic Mode :
Highest stable weight captured automatically. Ready for next measurement after pressing
FUNCTION key.
Manual Mode :
Press Function button to take measurement. Ready for next measurement after presssing Function
button.
Clear Peak :
Press and hold Function button - release when Mode>DISP/HOLD appears. In all modes, the
actual weight is shown on the primary display when READY or CLEAR PAN is shown on the
secondary display. The current Peak value is shown on the primary display when HOLD is shown
on the secondary display. Display icons annunciate weighing unit, stability and center of zero
when actual weight is displayed. The weighing unit only is annunciated when the Peak weight is
displayed.