EVS IPDirector Version 6.2 - June 2013 INGEST SCHEDULER User Manual - Manual (Page 62)

Failed Process
If the clip cannot be totally ingested from the scheduled IN port, the color of the block
becomes orange as soon as the clip recording ends.
12.1.3. Scheduling an Ingest from Another
Recorder Source
Introduction
When a recorder channel is associated to a router IN port, users scheduling an ingest will
be allowed to select the IN port from which it will be recorded.
The selection of a specific IN port is available for one-shot ingests, "Repeat" ingests and
"Repeat every" ingests.
Prerequisites
• The appropriate configuration must have been done from the Remote Installer
regarding the communication parameters and the association of router OUT ports
physically linked to recorder channels.
• The Router Control service is started.
• The user has the appropriate user rights.
• The Autoname Clips setting must not be selected, so the New Schedule window will
be displayed when scheduling an ingest.
How to Schedule an Ingest from another Recorder Source
To schedule an ingest from a recorder channel and change the router IN port associated to
the recorder channel, proceed as follows:
1. Draw a block on a channel track with a drag-and-drop operation by clicking the mouse
from the desired IN point and moving to the right up to the desired OUT point.
The New Schedule window opens. It displays the name of the current IN port next to
the recorder channel:
52 12. Managing Ingests from a Video Router
EVS Broadcast Equipment S.A. - June 2013 Issue 6.2.A