EVS IPDirector Version 6.2 - June 2013 INGEST SCHEDULER User Manual - Manual (Page 29)

4. Managing Channels
4.1. Managing Ganged Recorder Channels
Introduction
Recorder channels can be ganged and unganged from the Ingest Scheduler,
When a block is created on a gang channel, linked clips are automatically created with the
same properties on all the ganged channels.
When a block is created on the stream sub-track of a ganged recorder, linked files are
automatically created with the same properties on the stream sub-tracks of all the ganged
channels.
How to Gang Recorder Channels
To gang two or more channels from Ingest Scheduler, proceed as follows:
1. Select two or more channels using CTRL+click or SHIFT+click.
The selected channels are shown in blue.
2. Right-click one of the channels and select Gang.
3. The ganged channels are displayed with a chain symbol:
How to Un-Gang Recorder Channels
To ungang two or more ganged channels from Ingest Scheduler, proceed as follows:
4. Select the channel to be unganged.
5. Right-click the channel.
6. Select Ungang.
IPDirector - Version 6.2 - User Manual - Ingest Scheduler
4. Managing Channels 19