EVS IPDirector Version 6.2 - June 2013 INGEST SCHEDULER User Manual - Manual (Page 27)

3. Ingest Scheduler Settings
3.1. Introduction
Auto-Name settings are described in the General Functions user manual .
Settings specific to the Ingest Scheduler are defined in the Ingest Scheduler category of
the IPDirector Settings window.
Click Tools > Settings > Ingest Scheduler.
3.2. General Settings
Ingest Information Display
Information to be displayed on the ingest blocks, visible in the timeline, is set with this
option.
Auto-Name Clips
If this option is selected, the New Schedule window will not be displayed when an ingest
is created and the ingest will start instantly. The default name defined in Tools > Settings
> Autoname will be used. See
the General Functions user manual for more information.
If this option is not selected, the New Schedule window will open an ingest is created. The
user can enter data for the ingest in this window.
3.3. Remaining Capacity Settings
Display Remaining Capacity As
Unit in which the remaining capacity is displayed:
• Time
• Storage Space (GB, MB)
IPDirector - Version 6.2 - User Manual - Ingest Scheduler
3. Ingest Scheduler Settings 17