EVS XSense Version 10.03 - July 2010 Operating Manual - Manual (Page 72)

XSense – Version 10.03 – Operating Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.A
63
creating the clip, this timecode will replace the original timecode of the Short
IN point.
6. Press ALT+S to save the clip(s). The operator still has the opportunity to
rename the clip during this operation. He can then save the clip to the current
cursor location by pressing ENTER, or to the first available clip location on the
current server by pressing ALT+U.