EVS XSense Version 10.03 - July 2010 Operating Manual User Manual
Page 14
XSense – Version 10.03 – Operating Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.A
5
Note
The operational buttons have PRIMARY and SECONDARY functions and
are divided into upper and lower sections. By pressing the SHIFT button
you gain access to the secondary functions.
1. F-keys
&
small
buttons
Multi-purpose keys
2.
Soft keys
With LCD display, allows the operator to enter the
Multicam MENU system
3.
Jog dial
Used to accurately cue disk recorder
4. Operational
block 1
PLST
Initiates active playlist
LOOP
This option records the main output (PGM1) to the first
input (CAM A) of Multicam.
BROWSE
Used to browse through clips, playlists, cue points
INSERT
Used in playlist management to insert clips into a
playlist
IN
Sets Mark IN at the current position
GOTO IN
Goes to the defined Mark IN
OUT
Sets Mark OUT at the current position
GOTO OUT
Goes to the defined Mark OUT
TAKE
In PGM+PRV mode, pressing this button swaps cameras
on PGM and PRV monitors
In Multi-PGM mode, pressing this button toggles
between CAM selection and PGM selection modes.
In 2 PGM mode, when both PGMs are selected on the
Remote Panel, pressing this button swaps the content
loaded on PGM1 with the one loaded on PGM2 and vice-
versa.
In Playlist Edit mode, pressing this button inserts the
clip loaded on the PRV channel into current playlist.