EVS XSense Version 10.03 - July 2010 Operating Manual - Manual (Page 34)

XSense – Version 10.03 – Operating Manual
EVS Broadcast Equipment SA – July 2010
Issue
10.03.A
25
• When a clip is played, it will not stop on the Short OUT point, but will continue
to play through the Short OUT point by the Post-Roll duration defined in the
Setup Menu.
• When a record train is played, the same will happen if the Record Train OUTs
parameter is set to “Freeze” in the Setup menu.
• When a playlist is played, the Post-Roll will apply only to the last clip of the
playlist.
Search
This function allows the operator to search the database using keywords and
ranking. Refer to the section 10 “Keyword Management” on page 64 for further
details.
To return to the operational menu, press the MENU key from the Remote Panel.
6.1.2 O
PERATIONAL
M
ENU
Rst Cam Local Sync Prv 2nd CTRL
Cam A Cam B Cam C Cam D
CAM A/ B /C /D
This parameter allows selecting the camera on the PGM output if PRV CTL is OFF
and on PRV output if PRV CTL is ON.
Note
In 5CAM configuration (5 recorder channels and 1 player channel) or
when loading a clip where CAM E or F exists, the operational menu will
display:
Rst Cam Local Sync Prv 2nd CTRL
Cam A Cam B Cam C --->
By pressing the D key (- - - > ), the operator has access to the D, E and F
cameras. The operation menu becomes:
Rst Cam Local Sync Prv 2nd CTRL
Cam D Cam E Cam F <---
Press the D key (< - - - ) to return to CAM A, B, C selection.