Iplogger settings – EVS IPDirector Version 6.0 - November 2012 Part 2 User's Manual User Manual
Page 63

1.14.
IPLogger Settings
You can define the settings for IPLogger from the IPDirector main window via Tools >
Settings > IPLogger.
Option
Description
Apply a TC
offset at log
creation on a
live feed
To compensate for a delay in the logging relative to the image being
viewed, you can enter a timecode delay in milliseconds.
If you are for example logging a sports event in London, while the
event is being recorded in China, there could be a small delay
between the clip and the timecode in your logsheet.
The TC delay may also be used to compensate for the reaction
time of the logger, i.e. the delay between the instant the action
happens and when the logger clicks the New button.
The offset value must be included in the range "0 – 3 600 000"
msec.
Protect Media
Prefix
Determines the prefix to be added to the clip name when clips are
created using the Protect Media feature.
Warning
Messages
Determines whether or not warning messages will appear when
certain actions are performed.
Another setting exists under Tools > Settings > Clips > General for the automatic
creation of clips based on logs. Refer to section "Settings" in the chapter about System
Management.
IPDirector - Version 6.00 - User Manual - IPLogger
1. IPLogger
53