AASTRA 4224 Operator for MX-ONE User Guide - Manual (Page 57)

57 Dialog 4224 Operator
Service Features
Recalls diverted to another terminal
If you need to leave the terminal unattended e.g. during a Serial call
you must ensure that all calls are redirected to another operator.
To order Diversion of recalls: *21* z
Dial and enter the individual operator number. #
Press.
Note: U.K., dial
* 2 *
No.
#
=
Press to activate.
The display shows
OFF DUTY
on the top row.
To cancel the Diversion of recalls:
=
Press.
Note: You can also dial
# 2 1 #
to cancel the Diversion
(U.K.:
# 2 #
).
Dialing during a connected call
When calling interactive teleservices, e.g. telephone banks, you
need to use Dual Tone Multi Frequency (DTMF) signals. If your
exchange is not already programmed to automatically convert your
entered digits into DTMF signals, you need to activate the function
during the call. У Т
< Speech Press during the call.
The display shows
DTMF-TONE
, informing that you have entered
DTMF mode. z
Dial the requested digits.
У Т
< Speech Press to end DTMF mode.
Ò
< Clear Press to terminate.
The terminal is cleared and the call is disconnected.